A word from the Maestro

Greg ProfileI see people asking at times “what kind of sword should I get?”… the sword in question could be of any “period” or “model” from rapier to broadsword to sabre, etc.. My thoughts on this, which are basically as important or useful as opinions and we know the old saying about opinions, are as follows:
It is my thought that if you are going to buy a sword, buy one that can be sharpened and used in a real fight. What does that mean… well if you are going to “cut” someone with your rapier for instance, be sure that rapier will actually be able to cut.. as opposed say to a cut and thrust type blade. I have both, a rapier that is thin and pointy but is also very, very sharp. My friend Alex can attest that I used to slice wedges from lemons still on the tree with the tip, so tip cuts to unprotected body part, say like a face, would be very effective. And as my roommate Joe can attest, as he grabbed the blade one day (it was hanging on the wall of the staircase) as he stumbled on the stairs, the length of the blade was also sharp enough to almost make him lose two fingers. And I have a cut and thrust from Darkwood which Scott sharpened for me. It is strong enough to chop down a small tree or split a head or easily sever tendons, ligaments, fingers, etc..now will it cut through heavy clothing or leather jacket.. mm not really, at least not on he first cut and draw and unless there is something solid beneath. But unprotected flesh…yeah.
So I like to buy stuff I can practice with then sharpen and use real if I have to. Now if your goal is to fight and win tournaments..that is a different story.. realism and usefulness become two different things, although “judges” at tournaments will make judgement (haha) calls regarding what is a good and effective cut, the blade being used probably is not actually able to make that cut, if it is say a 45 inch rapier striking a leg with the last 25 inches or so of the blade. You will get a point but realistically.. not much damage probably.
So buy something that can be used for real, or get a really good guard then switch in a tournament winning blade for the real one when you want to do some make believe.
So it has been my thought over about the last 25 to 30 years always to strive to be as realistic as possible when sparring, over the years we have gravitated to more and more actually usable swords. For me that means a blade length which I might be comfortable with in a true combat situation.
For me that is about 35 to 38 or so inches. And a width and heft sufficient to chop into, say …a head. A couple of my favorite actual weapons are “modern era” sabres such as the Patton sabre. A double edged and pointy sword with a nice big bell guard. So some awesome hand protection. In fighting with any sword, hand protection is of BIG importance so I love bell guard sabres. Plus this particular sabre can be used ambidextrously. All that being said, and somewhat on topic, go realistic and functional, but scale the weapon to you. If you are unable to heft a cut and thrust type sword, get a smaller one and focus on speed, agility, and finesse. All of which can be taught

And on a side note, winning tournaments does not make someone a good fighter, or even knowledgeable, it just means they know how to get points to win a make believe situation. What we in Loyal Order of the Sword want to do is create good fighters, who can apply what they learn in a combat situation. Not just someone who can “outpoint” an opponent in a tournament.

EDIT:  A note here from Shawn Fackler about blade widths from Castille.  “I decided to make a little figure for referencing Castille Armory blades because it can be difficult to compare blade sizes. Definitely don’t go with a “Basic Rapier Blade” since they’re basically the same as the old schlager blades we used years ago.”

castille-armory-blade-widths